What are the SMT Processing Materials?

      The quality and production efficiency of SMT processing is very critical to PCB, and the materials used for processing play a crucial role. So what are the materials in SMT processing?

 

1. Solder Paste

Solder paste is a paste made by alloy solder powder and paste soldering flux. It is an indispensable solder material in SMT processing and is widely used in reflow soldering. Solder paste has a certain viscosity at room temperature, which can stick electronic components in designated positions, and then at the soldering temperature, with the volatilization of solvents and some additives, the soldered components are connected to the PCB to form a permanent connection.

 

 

2. Soldering Flux

Soldering is the main process of SMT processing, and soldering flux is an auxiliary material used in soldering. Its main function is to remove the oxides on the surface of the solder and the material to be soldered, so that the metal surface can achieve the necessary cleanliness. It can also prevent the surface from being oxidized again during soldering, reduce the surface tension of the solder, and improve the soldering performance. The quality of the soldering flux performance will directly affect the quality of the PCB.

 

 

3. Adhesives

Adhesive is usually red, but also yellow and white. Adhesives such as hardeners, pigments, and solvents are evenly distributed in the patch glue, which is mainly used to fix components on the PCB. It is generally used by dispensing or stencil printing. After attaching the components, put them in an oven or reflow oven to heat and harden.

 

 

4. Cleaning Agent

The cleaning agent is used to clean the residue after soldering. When the welding is completed, the equipment needs to be cleaned in time so as not to affect the next use.

 

 

Different assembly processes use different materials. Sometimes in the same assembly process, due to different subsequent processes, the materials used will also be different. HOYOGO is an international, professional and reliable PCB manufacturer. We can provide you with professional SMT processing services, and accept customer processing and OEM other processing form.

评论

发表评论

此博客中的热门博文

What are the Advantages and Disadvantages of the OSP Technology

图片
     With the continuous development of the electronics industry, there are more and more PCB surface treatment technologies, and each technology has its own merits. OSP is a commonly used surface treatment technology process, what are its advantages and disadvantages?       Compared with other surface treatment technologies, OSP is somewhat different.  It uses a chemical method to produce an organic film on the clean bare copper surface, which acts as a barrier between the copper and the air.   OSP is organic, not  metallic,   and its cost is lower than most surface treatment technologies.     Advantages: With this organic film, it can resist the attack of moisture in the air without being oxidized before welding,  can withstand the test of high temperature, maintain good activity, and has a good tinning ability.  This layer of organic film will not cause damage to the sheet material. It can be easily removed by the solder resist during soldering. It can solder the copper wire and the
阅读全文

What PCBA Problems Can AOI Inspect

图片
        With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye, so AOI has appeared.  So what PCBA problems can AOI inspect?   The working principle of AOI is to first collect and input parameters such as images, component positions, solder joints and other parameters of the good-quality board.   During the inspection, the instrument automatically scans the circuit board and automatically captures the image, and then compares the collected data with the pre-entered parameters to determine whether the characteristics of solder joints, components and other aspects are consistent. If the data is inconsistent, the d efect  will be flagged through the display for maintenance personnel to repair.     AOI is mainly used to inspect solder paste printing, component placement and soldering. For example: too much or too little solder paste,   solder paste printing offset;  co
阅读全文

The Role of Shield Cover in PCB Design

图片
  SHENZHEN HOYOGO ELECTRONIC TECHNOLOGY CO., LTD. specializes in providing overall PCBA electronics manufacturing services, and can also provide customers with a full range of value-added services: including SMT assembly, PCB program development, schematic design, PCB layout and routing, Bom list matching, component procurement and other services. Do you know the role of shield cover in PCB design? What is a Shield Cover? The shield cover is an alloy metal cover, which is a vital component to reduce the radiation of the display. It is used in MID or VR products, which can effectively reduce the mutual interference between modules. It is common in the isolation between the main control function module and the power module and the Wifi module. The  P urpose of  S hield  Cover   C lip Generally, there are products that use wireless communication, and shield frames are usually designed on the circuit board to isolate electromagnetic interference (EMI). However, to make the shield frame fun
阅读全文