What are the Requirements for PCB Soldering?

     Soldering is an important process in the PCB processing, which plays a decisive role tin the quality of the PCB. So, what are the requirements for PCB soldering?

 

 

 

1. Good solderability

Under certain soldering conditions, the ability to easily obtain good welded joints is called solderability. In order to improve the solderability, measures such as tin plating and silver plating on the surface can be used to prevent oxidation of the material surface.

 

 

2. The surface of the soldering lug is clean

In order to achieve a good combination of soldering tin and weldment, even if the solderability is good, the surface of the soldering lug must be clean. Due to the long-term storage and pollution, the surface of the soldering lug may produce harmful oxide film, oil stains, etc. So, please be sure to clean the surface of the soldering lug before soldering, otherwise the soldering quality cannot be guaranteed.

 

 

3. Suitable flux

The function of the flux is to remove the oxide film on the surface of the weldment. Different soldering technology should choose different fux. Generally, when soldering precision electronic products such as PCB, in order to make the soldering reliable and stable, the flux mainly based on rosin is usually used.

 

 

4. Proper temperature

During soldering, the function of heat energy is to melt the soldering tin and heat the welding object, so that the tin and lead can obtain enough energy to penetrate into the crystal lattice on the surface of the welded metal to form an alloy. When the soldering temperature is too low, the alloy cannot be formed, and it is easy to form a Pseudo Soldering. When the soldering temperature is too high, the solder will be in a non-eutectic state, which will accelerate the decomposition and volatilization of the flux, and reduce the quality of the solder.

 

 

5. Suitable soldering time

Soldering time refers to the time required for physical and chemical changes during the entire soldering process. When the soldering temperature is determined, the appropriate soldering time should be determined according to the shape, nature, and characteristics of the welded part. If the soldering time is too long, it is easy to damage the welding parts of the components; if the soldering time is too short, the soldering requirements will not be met.

评论

发表评论

此博客中的热门博文

What are the Advantages and Disadvantages of the OSP Technology

图片
     With the continuous development of the electronics industry, there are more and more PCB surface treatment technologies, and each technology has its own merits. OSP is a commonly used surface treatment technology process, what are its advantages and disadvantages?       Compared with other surface treatment technologies, OSP is somewhat different.  It uses a chemical method to produce an organic film on the clean bare copper surface, which acts as a barrier between the copper and the air.   OSP is organic, not  metallic,   and its cost is lower than most surface treatment technologies.     Advantages: With this organic film, it can resist the attack of moisture in the air without being oxidized before welding,  can withstand the test of high temperature, maintain good activity, and has a good tinning ability.  This layer of organic film will not cause damage to the sheet material. It can be easily removed by the solder resist during soldering. It can solder the copper wire and the
阅读全文

What PCBA Problems Can AOI Inspect

图片
        With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye, so AOI has appeared.  So what PCBA problems can AOI inspect?   The working principle of AOI is to first collect and input parameters such as images, component positions, solder joints and other parameters of the good-quality board.   During the inspection, the instrument automatically scans the circuit board and automatically captures the image, and then compares the collected data with the pre-entered parameters to determine whether the characteristics of solder joints, components and other aspects are consistent. If the data is inconsistent, the d efect  will be flagged through the display for maintenance personnel to repair.     AOI is mainly used to inspect solder paste printing, component placement and soldering. For example: too much or too little solder paste,   solder paste printing offset;  co
阅读全文

The Role of Shield Cover in PCB Design

图片
  SHENZHEN HOYOGO ELECTRONIC TECHNOLOGY CO., LTD. specializes in providing overall PCBA electronics manufacturing services, and can also provide customers with a full range of value-added services: including SMT assembly, PCB program development, schematic design, PCB layout and routing, Bom list matching, component procurement and other services. Do you know the role of shield cover in PCB design? What is a Shield Cover? The shield cover is an alloy metal cover, which is a vital component to reduce the radiation of the display. It is used in MID or VR products, which can effectively reduce the mutual interference between modules. It is common in the isolation between the main control function module and the power module and the Wifi module. The  P urpose of  S hield  Cover   C lip Generally, there are products that use wireless communication, and shield frames are usually designed on the circuit board to isolate electromagnetic interference (EMI). However, to make the shield frame fun
阅读全文