What are the Advantages of SMT Processing?

      SMT is a mounting technology that does not require drilling insertion holes on the PCBA board, but directly attaches or solders surface mount components to the component positions specified on the surface of the PCBA board. So what are the advantages of SMT processing?

 

 

 

1. Miniaturization

SMT processing has the characteristics of high assembly density, small size and light weight.The volume and weight of SMT components are only about 1/10 of those of traditional plug-in components. Generally, electronic products are reduced by 40%~60% in volume and 60%~80% in weight after using SMT. The distance between the adjacent electrodes of the SMT components is much smaller than the lead spacing of the traditional DIP integrated circuit, and the current pin spacing has reached 0.3mm.

 

 

2. Electrical Properties

Surface mount components reduce parasitic lead and conductor inductance while improving the characteristics of capacitors, resistors and other components. It can make the transmission delay small, the signal transmission speed is accelerated, and the radio frequency interference is eliminated at the same time, so that the high-frequency characteristics of the circuit are better, the working speed is faster, the noise is obviously reduced, and the electromagnetic interference is also reduced.

 

 

3. Automation

The standardization, serialization and welding conditions of the chip components used in SMT processing are consistent, the automation degree of surface mounting is high, and the production efficiency has been greatly improved.

 

 

4. Cost Reduction

The volume of SMT components is generally reduced, resulting in reduced packaging material consumption. In the SMT processing, the components do not need to be pre-shaped and cut, and the PCBA board does not need to be punched, saving manpower and material resources, thereby generally reducing the production cost.

 

 

5. Quality improvement

SMT placement technology can ensure that the solder joint defect rate of electronic products or components is low.Therefore, electronic components or electronic products processed with SMT have strong vibration resistance, high reliability, and can also reduce electromagnetic and radio frequency interference.

评论

发表评论

此博客中的热门博文

What are the Advantages and Disadvantages of the OSP Technology

图片
     With the continuous development of the electronics industry, there are more and more PCB surface treatment technologies, and each technology has its own merits. OSP is a commonly used surface treatment technology process, what are its advantages and disadvantages?       Compared with other surface treatment technologies, OSP is somewhat different.  It uses a chemical method to produce an organic film on the clean bare copper surface, which acts as a barrier between the copper and the air.   OSP is organic, not  metallic,   and its cost is lower than most surface treatment technologies.     Advantages: With this organic film, it can resist the attack of moisture in the air without being oxidized before welding,  can withstand the test of high temperature, maintain good activity, and has a good tinning ability.  This layer of organic film will not cause damage to the sheet material. It can be easily removed by the solder resist during soldering. It can solder the copper wire and the
阅读全文

What PCBA Problems Can AOI Inspect

图片
        With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye, so AOI has appeared.  So what PCBA problems can AOI inspect?   The working principle of AOI is to first collect and input parameters such as images, component positions, solder joints and other parameters of the good-quality board.   During the inspection, the instrument automatically scans the circuit board and automatically captures the image, and then compares the collected data with the pre-entered parameters to determine whether the characteristics of solder joints, components and other aspects are consistent. If the data is inconsistent, the d efect  will be flagged through the display for maintenance personnel to repair.     AOI is mainly used to inspect solder paste printing, component placement and soldering. For example: too much or too little solder paste,   solder paste printing offset;  co
阅读全文

The Role of Shield Cover in PCB Design

图片
  SHENZHEN HOYOGO ELECTRONIC TECHNOLOGY CO., LTD. specializes in providing overall PCBA electronics manufacturing services, and can also provide customers with a full range of value-added services: including SMT assembly, PCB program development, schematic design, PCB layout and routing, Bom list matching, component procurement and other services. Do you know the role of shield cover in PCB design? What is a Shield Cover? The shield cover is an alloy metal cover, which is a vital component to reduce the radiation of the display. It is used in MID or VR products, which can effectively reduce the mutual interference between modules. It is common in the isolation between the main control function module and the power module and the Wifi module. The  P urpose of  S hield  Cover   C lip Generally, there are products that use wireless communication, and shield frames are usually designed on the circuit board to isolate electromagnetic interference (EMI). However, to make the shield frame fun
阅读全文