What are the Methods of PCB Splitting?

      In the PCB processing process, in order to save costs and improve production efficiency, the PCB is usually spliced in the PCB manufacturing link, that is to say, multiple PCB are spliced on a substrate. After the assembly work is completed, the PCB needs to be spliced for subsequent testing, packaging and other work. So what are the methods of PCB splitting?

 

 

 

1. Manual Splitting Board

Manual splitting board is mainly divided into manual splitting and shears board cutting pliers. Manual splitting board is the operator manually breaking, folding and other actions to separate the panel boards. Cutting pliers and dividing the board is to cut the board with the help of cutting pliers. Manual splitting board was the main splitting board method in the past, but due to the excessive stress caused by manual work during splitting board, the PCB was damaged. Therefore, with the popularization of the application of splitting board machines, the manual splitting board method has been rarely used.

 

 

2. V-Cut Splitting Board

The V-cut splitting board is suitable for the PCB board of V-CUT. It needs to be operated with the help of the V-cut splitting to fix the PCB board and divide it by the movement of the blade. The V-cut splitting can only run in one direction and cannot be turned, so it is more suitable for rectangular PCB boards. V-cut splitting board separation is simple in operation, low in cost and fast in boards separation efficiency, but it will also cause defects such as burrs on the cutting edge due to blade and other reasons.

 

 

3. Milling Cutter Splitting Board

The milling cutter splitting board is suitable for the PCB board with the stamp hole, and it needs to be operated with the milling cutter splitting board machine. A milling cutter is a multi-gear rotary cutter. When dividing the board, the milling cutter type machine will cut the board according to the pre-programmed cutting path, and it can cut any shape such as straight line or arc. Therefore, it is very suitable for some special-shaped boards, and the effect of the milling cutter type board is also very good, with the advantages of no burrs and small stress, etc.

 

 

As mentioned above, different board separation methods have different advantages and disadvantages, and the specific choice needs to be determined according to the method of PCB panel.

评论

发表评论

此博客中的热门博文

What are the Advantages and Disadvantages of the OSP Technology

图片
     With the continuous development of the electronics industry, there are more and more PCB surface treatment technologies, and each technology has its own merits. OSP is a commonly used surface treatment technology process, what are its advantages and disadvantages?       Compared with other surface treatment technologies, OSP is somewhat different.  It uses a chemical method to produce an organic film on the clean bare copper surface, which acts as a barrier between the copper and the air.   OSP is organic, not  metallic,   and its cost is lower than most surface treatment technologies.     Advantages: With this organic film, it can resist the attack of moisture in the air without being oxidized before welding,  can withstand the test of high temperature, maintain good activity, and has a good tinning ability.  This layer of organic film will not cause damage to the sheet material. It can be easily removed by the solder resist during soldering. It can solder the copper wire and the
阅读全文

What PCBA Problems Can AOI Inspect

图片
        With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye, so AOI has appeared.  So what PCBA problems can AOI inspect?   The working principle of AOI is to first collect and input parameters such as images, component positions, solder joints and other parameters of the good-quality board.   During the inspection, the instrument automatically scans the circuit board and automatically captures the image, and then compares the collected data with the pre-entered parameters to determine whether the characteristics of solder joints, components and other aspects are consistent. If the data is inconsistent, the d efect  will be flagged through the display for maintenance personnel to repair.     AOI is mainly used to inspect solder paste printing, component placement and soldering. For example: too much or too little solder paste,   solder paste printing offset;  co
阅读全文

The Role of Shield Cover in PCB Design

图片
  SHENZHEN HOYOGO ELECTRONIC TECHNOLOGY CO., LTD. specializes in providing overall PCBA electronics manufacturing services, and can also provide customers with a full range of value-added services: including SMT assembly, PCB program development, schematic design, PCB layout and routing, Bom list matching, component procurement and other services. Do you know the role of shield cover in PCB design? What is a Shield Cover? The shield cover is an alloy metal cover, which is a vital component to reduce the radiation of the display. It is used in MID or VR products, which can effectively reduce the mutual interference between modules. It is common in the isolation between the main control function module and the power module and the Wifi module. The  P urpose of  S hield  Cover   C lip Generally, there are products that use wireless communication, and shield frames are usually designed on the circuit board to isolate electromagnetic interference (EMI). However, to make the shield frame fun
阅读全文