What are the Advantages of PCB Reflow Soldering

       Reflow soldering is a soldering technology developed with the emergence of miniaturized electronic products. It is mainly used in the soldering of various surface mount components, and has become the mainstream of PCB assembly technology in PCBA factory. So what advantages does it have?

 

1. When PCB manufacturers perform reflow soldering, the components are not directly immersed in the molten solder, so the thermal shock to the components is small.

 

 

2. PCB factory can control the amount of solder applied in the leading process to reduce soldering defects such as virtual soldering and bridging. Therefore, the welding quality is good, the consistency of the solder joints is good, and the reliability is high.

 

 

3. If the position of the solder on the PCB is correct in the pre-process, but the position of the component is deviated to a certain extent, and in the process of reflow soldering, when all the solder terminals, pins and corresponding pads of the components are infiltrated at the same time, due to the self-positioning effect produced by the surface tension of the molten solder, it can automatically correct the deviation and pull the component back to an approximately accurate position.

 

 

4. The solder for reflow soldering is a commercial solder paste, which can ensure the correct composition and generally does not mix impurities.

 

 

5. The reflow soldering process can use a locally heated heat source, so different soldering methods can be used on the same substrate for soldering.

 

 

6. Reflow soldering process is simple, and the workload of repairing is very small.

 

 

In addition, if the PCB adopts reflow soldering technology, solder needs to be applied to the parts to be soldered before soldering. The main methods of applying solder to solder joints are the solder paste method, the pre-coated solder method, and the pre-formed solder method.

 

 

HoYoGo is an international, professional and reliable PCB factory, with many years of PCB production experience, can realize the production of high-tech, high-quality, high-difficulty performance PCBs, and can guarantee the quality of products delivered to customers is reliable.

评论

发表评论

此博客中的热门博文

What are the Advantages and Disadvantages of the OSP Technology

图片
     With the continuous development of the electronics industry, there are more and more PCB surface treatment technologies, and each technology has its own merits. OSP is a commonly used surface treatment technology process, what are its advantages and disadvantages?       Compared with other surface treatment technologies, OSP is somewhat different.  It uses a chemical method to produce an organic film on the clean bare copper surface, which acts as a barrier between the copper and the air.   OSP is organic, not  metallic,   and its cost is lower than most surface treatment technologies.     Advantages: With this organic film, it can resist the attack of moisture in the air without being oxidized before welding,  can withstand the test of high temperature, maintain good activity, and has a good tinning ability.  This layer of organic film will not cause damage to the sheet material. It can be easily removed by the solder resist during soldering. It can solder the copper wire and the
阅读全文

What PCBA Problems Can AOI Inspect

图片
        With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye, so AOI has appeared.  So what PCBA problems can AOI inspect?   The working principle of AOI is to first collect and input parameters such as images, component positions, solder joints and other parameters of the good-quality board.   During the inspection, the instrument automatically scans the circuit board and automatically captures the image, and then compares the collected data with the pre-entered parameters to determine whether the characteristics of solder joints, components and other aspects are consistent. If the data is inconsistent, the d efect  will be flagged through the display for maintenance personnel to repair.     AOI is mainly used to inspect solder paste printing, component placement and soldering. For example: too much or too little solder paste,   solder paste printing offset;  co
阅读全文

The Role of Shield Cover in PCB Design

图片
  SHENZHEN HOYOGO ELECTRONIC TECHNOLOGY CO., LTD. specializes in providing overall PCBA electronics manufacturing services, and can also provide customers with a full range of value-added services: including SMT assembly, PCB program development, schematic design, PCB layout and routing, Bom list matching, component procurement and other services. Do you know the role of shield cover in PCB design? What is a Shield Cover? The shield cover is an alloy metal cover, which is a vital component to reduce the radiation of the display. It is used in MID or VR products, which can effectively reduce the mutual interference between modules. It is common in the isolation between the main control function module and the power module and the Wifi module. The  P urpose of  S hield  Cover   C lip Generally, there are products that use wireless communication, and shield frames are usually designed on the circuit board to isolate electromagnetic interference (EMI). However, to make the shield frame fun
阅读全文